How to Keep the Conveyor Belt Running Smoothly

Does your conveyor belt have conditions such as conveyor belt slippage, frequent failures of the conveyor system, uneven wear of components, etc., which cause the conveyor belt to run unsmoothly? Obviously, this situation will slow down your work or stop working, which will lead to a waste of money and time, and even serious situations will put the safety of employees at risk. This is not worth the loss, so how to make the conveyor belt in a smooth running state is very important. As a conveyor belt supplier, I'd like to share it with you!

Conveyor belt for chemical plant

Keep the Conveyor Belt Clean

Residual material on the surface of the pulley or on the belt table is the most pressing issue that affects performance and belt life. Residual material on the surface of the pulley or on the belt table is the most pressing issue that affects performance and belt life. Therefore, the belt cleaning should start from the belt maintenance step.

Over time, even a small amount of oil, grease, or particulate residue in the corners and gaps of the conveyor belt system can wear the conveyor belt, which can cause the conveyor belt to lose alignment, which can lead to slippage or corrosion of the material.

In this regard, please follow the conveyor belt maintenance guide so that you know how to clean the conveyor belt system and use the correct cleaning agent. Because some chemicals can react or corrode with certain types of conveyor belt materials. Disassemble the conveyor belt system for deep cleaning and regular disinfection, and pay close attention to corners, joints, and other places where invisible material or spills may collect. And finally, carefully test your belt tracking post-cleaning before putting your conveyor belt back online.

Check Belt Tracking

The signs of tracking problems are similar to the failures that may occur when you use the tires of the vehicle, such as vibration or frictional noise, frequent skidding and parking, or uneven wear or damage points.

Conveyor belt adjustment can also prevent uneven wear and belt slippage. In addition, incorrectly aligned conveyor belts will "pull" in one direction, coupled with long-term uneven pressure and wear, which will often cause them to jam or slip. It should be noted that the narrower the conveyor belt, the greater the possibility of tracking problems.

Watch for Signs of Belt Slippage

Conveyor maintenance can also prevent your conveyor system from slipping. The first signs of belt slippage may be small, so watch out! Conveyor belt slippage is by far the most common transportation maintenance problem. It can cause a series of other problems-downtime, material loss and damage, and even employee injury. Belt tracking problems, incorrect lacing, incorrect tension adjustment, and worn pulleys can all cause belt slippage.

Choose a High-quality Conveyor Belt

HENGGUANG specializes in R&D, design, production and sales of conveyor machinery. Our products include the following series: roller series, bracket series, conveyor series and conveyor belt series. And high quality, high efficiency, safety and reliability are the characteristics of our products. If you want to learn more about conveyor belts, please contact us!