How to maintain the conveyor belt？

Conveyor manufacturer produce conveyor belts of various specifications and models according to the use environment and requirements. There are common conveyor belts, nylon (NN) conveyor belts, heat-resistant conveyor belts, ring conveyor belt, and pattern conveyor belts.Conveyor belts can bring great convenience to the transportation and transportation of materials. However, after long-term use, some problems will inevitably occur. In order to extend the service life of the conveyor belt, it will bring more benefits to us. In use, you should pay more attention to maintenance. If problems occur, you should carry out maintenance in time. The conveyor belt manufacturer will introduce the maintenance work of the conveyor belt. The conveyor belt is a belt installed on the conveyor for carrying and conveying materials. It has three parts, one is the core, the other is the core rubber, and the third is the surface layer of the cover rubber.

Ring Conveyor Belt

1. The bearing point is the vulnerable part of the conveyor belt, the belt speed and the material blockage related to the transportation of the conveyor belt. The impact force and the direction of the bearing operation are all important factors to be noted. The width of the receiving end of the charging chute should be large enough. .

2. Special protection must be applied to keep all rollers and rollers clean. Keep the return roller and the slow roller cleaning. The tape is clean when it comes back to running.

3. All rollers should be flexible. If there are many attachments on the rollers, the belt will be deflected and the belt will be partially damaged and broken.

4, should strictly abide by the management of the roller and the provisions of buttering, damaged and timely replacement without repair.

5. Check whether the tensioning device can move, the stroke size, and the sliding condition of the guide frame are good. Regularly fill the oil and check the cover plate installed in the tensioning device to prevent the material from falling.

6. Regularly checking the fault of the conveyor belt itself and handling it in time is the main measure to prevent accidents and improve the service life of the belt.

Rubber conveyor belt maintenance and maintenance points:

1. Avoid the trough idler is covered by the material and cause the rotation to be unstable. Prevent the leakage card between the roller and the roller and the tape. Pay attention to the lubrication of the active part, but not the oily rubber conveyor belt.

2. The drum is prevented from starting with load.

3. Corrective measures should be taken in time for the deviation of the tape.

4. It is found that the local damage of the tape should be repaired in time to avoid expansion.

5. Avoid the tape being blocked by the frame, the pillar or the block material to prevent the cracking and tearing. The use of the conveyor belt. With the rubber conveyor belt in the production of the I industry, multi-variety, high performance, lightweight, multi-function,energy and long life are several aspects that manufacturers pay attention to.

6. The type, structure and number of layers of the conveyor belt should be selected according to the conditions of use.

7. The running speed of the conveyor belt should not exceed 2.5 m / s. The material with large block size and large wear should use the fixed force type unloading device, and the low speed should be used as much as possible.

8. The relationship between the diameter of the transmission drum of the conveyor and the belt layer of the conveyor belt, the matching of the transmission roller, the reversing drum and the bracket angle should be reasonably selected according to the design regulations of the conveyor.

The above is the conveyor belt manufacturer's introduction to the maintenance of the conveyor belt, I hope to help you solve your problem.Our company produces conveyor machinery and accessories, polymer roller and conveyor belts and other products.Quality assurance, trusted by customers, if you have any needs, please contact us.