The speed of belt conveyor should be appropriate

Belt Conveyor Machine manufacturer shares that belt conveyor speed should not be too large, to prevent the increase of power.

Mass or volume calculation of conveying materials; The number of pieces delivered per hour when the finished product is shipped. Belt conveyor conveying speed: increase the conveying speed can improve the conveying capacity. When the conveyor belt is used as a traction member and the transmission length is large, the transmission speed increases. However, high speed belt conveyor should pay attention to vibration, noise and start and brake problems. For the use of chain as a traction component of the conveyor, the transmission speed should not be too large, to prevent the dynamic load increase. At the same time, the conveying speed of process operation should be determined according to the requirements of production process.

Dimensions of belt conveyor components: dimensions of conveyor components include conveyor width, slat width, hopper volume, pipe diameter and container size. The size of these parts directly affects the conveying capacity of the conveyor. The length and inclination of the conveyor: the length and inclination Angle of the conveyor directly affect the total resistance and power required. Before the belt conveyor runs, first confirm the belt conveyor equipment and personnel. The goods to be transported shall be in a safe and complete state; Secondly, check every moving part, no foreign matter, check whether all the circuits are normal, whether the belt conveyor can be put into operation normally. Check if the difference between the supply voltage and the rated voltage of the equipment exceeds ± 5%.

The belt conveyor closes the main power switch to check whether the power supply of the equipment is normally sent in and whether the power indicator is on. After normal operation, proceed to the next step. The belt conveyor closes the power switch of each circuit to check whether it is normal. Under normal circumstances: the equipment does not work, the belt conveyor running indicator light does not light, the inverter and other equipment power indicator light, inverter display panel is normal (no fault code display). The belt conveyor starts each electrical equipment in turn according to the process flow. After the previous electrical equipment starts normally (the motor or other equipment has reached the normal speed and condition), start the next electrical equipment.

In the operation of the belt conveyor, the provisions of the conveyor design must be complied with, and the design capability of the belt conveyor must be complied with. Secondly, it should be noted that all types of personnel are not allowed to touch the moving parts of the belt conveyor, and non-professionals are not allowed to touch the electrical components and control buttons at will. The belt drive should not be disconnected from the back stage of the converter. If maintenance is to be determined, it must be stopped when the converter is stopped. Otherwise the inverter may be damaged.

That's all for the sharing,and we supply Belt Conveyor Machine China for sale, if you have any demand for our products,just feel free to contact us.